Product | KMS105 | Detail Data
| Acoustical operating principle | Pressure gradient transducer |
|---|---|
| Directional Pattern | Supercardioid |
| Frequency Range | 20 Hz ... 20 kHz |
| Sensitivity at 1 kHz into 1 kohm | 4.5 mV/Pa ± 1 dB equ. -47 dBV |
| Rated Impedance | 50 ohms |
| Rated load impedance | 1 kohms |
| Equivalent noise level, CCIR¹⁾ | 28 dB |
| Equivalent noise level, A-weighted¹⁾ | 18 dB-A |
| Maximum SPL for THD 0.5%²⁾ | 150 dB |
| Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾ | 66 dB |
| Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾ | 76 dB |
| Maximum output voltage | 12 dBu |
| Supply voltage (P48, IEC 61938) | 48 V ± 4 V |
| Current consumption (P48, IEC 61938) | 3.5 mA |
| Matching connector | XLR 3 F |
| Weight | approx. 300 g |
| Diameter | 48 mm |
| Length | 180 mm |
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal
Diagrams
Hypercardioid KMS 105
