Product | TLM107 | Detail Data
Acoustical operating principle | Pressure gradient transducer |
---|---|
Directional Pattern | Omni, wide angle cardioid, cardioid, hypercardioid, figure-8 |
Frequency Range | 20 Hz ... 20 kHz |
Sensitivity at 1 kHz into 1 kohm | 11 mV/Pa |
Rated Impedance | 50 ohms |
Rated load impedance | 1000 ohms |
Equivalent noise level, CCIR¹⁾ | 22 dB |
Equivalent noise level, A-weighted¹⁾ | 10 dB-A |
Maximum SPL for THD 0.5%²⁾ | 141 dB |
Maximum SPL for THD < 0.5% with pre-attenuation -6 dB²⁾ | 147 dB |
Maximum SPL for THD < 0.5% with pre-attenuation -12 dB²⁾ | 153 dB |
Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾ | 72 dB |
Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾ | 84 dB |
Maximum output voltage | 10 dBu |
Supply voltage (P48, IEC 61938) | 48 V ± 4 V |
Current consumption (P48, IEC 61938) | 3.2 mA |
Matching connector | XLR 3 F |
Weight | 445 g |
Diameter | 64 mm |
Length | 145 mm |
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal