Free field frequency response ±6 dB |
30 Hz … 22 kHz |
Free field frequency response ±3 dB |
34 Hz … 21 kHz |
Free field frequency linearity deviation between 100 Hz and 10 kHz |
± 1.1 dB |
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) |
<20 dB(A) SPL |
Sine wave output with a THD < 0.5 % at 1 m in half space |
95 dB SPL (>85 Hz) |
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) |
116.3 dB SPL |
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) |
110.3 dB SPL |
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) |
106.8 dB SPL |
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions |
108 dB(C) SPL |
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced |
±0.87; ±0.39; ±0.23 dB |
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) |
100 dB(C) SPL |
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) |
107 dB(C) SPL |
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) |
93 / 99 dB(C) SPL |
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) |
94 / 100 dB(C) SPL |
Display Brightness |
White: 100%/60%/30%/off; Red: 100%/60%/30% |
Output power midrange amplifier (THD+N with limiter deactivated: 10%) |
90 W |
Output power midrange amplifier (THD+N with limiter deactivated: 0.1%) |
70 W |
Midrange |
75 mm (3") with magnetic sheilding |
Bass Extension (Hz, -6 dB) |
30 |
Maximum output level (dB SPL) |
116.3 |
Max. Listening Distance up to (m) |
6 |
Analog input(s) |
XLR: analog electronically balanced |
Analog input impedance |
>13k Ohms |
Max. input level |
+24 dBu |
Common mode rejection ratio (CMRR) |
>56 dB @ 15kHz |
Input gain control (sensitivity) |
0 dB ... -15 dB |
Output level control (output level in 1 m based on 0 dBu input level) |
94; 100; 108; 114 dB SPL |
Equalization: Bass |
0; -2.5; -5; -7.5 dB |
Equalization: Low-Mid |
0; -1.5; -3; -4.5 dB |
Equalization: Treble |
+1; 0; -1; -2 dB |
Controller design |
Analog; active |
Crossover frequency |
650 Hz and 2.0 kHz |
Crossover slope |
24 dB/oct; 4th order |
Protection circuitry |
Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters. Amplifier overheat. |
Infrasonic filter: frequency; slope |
15 Hz; 6 dB/oct. |
Display: On; Normal Operation |
Neumann logo “White” |
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute |
Neumann logo “Red” |
Output power woofer amplifier (THD+N with limiter deactivated: 10%) |
210 W |
Output power tweeter amplifier (THD+N with limiter deactivated: 10%) |
90 W |
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) |
150 W |
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) |
70 W |
Mains Power Supply: input voltage; frequency |
100-240V; 50/60 Hz |
Power consumption (230 V / 100 V): Idle |
24 W |
Power consumption (230 V / 100 V): Full output |
300 W |
Cabinet material |
Polyurethane front, wooden sleeve, aluminum electronics panel |
Cabinet surface finish; color (front / back) |
Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
Operating conditions |
+10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
Transport/storage conditions |
-25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
Woofer |
210 mm (8 1/4") magnetically sheilded |
Tweeter |
25 mm (1") with protecting black metal grille |
Mounting points |
2 x M8 on side panels; thread depth from outside of cabinet 25 mm (1”);Rear panel screws for attaching LH 41 base plate |
Product dimensions (height x width x depth) |
253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2") |
External net volume |
28.3 liters |
Packed dimensions (height x width x depth), mm (inches) |
360 x 380 x 590 mm (14 1/8" x 15" x 23 1/4") |