Free field frequency response ±6 dB |
17 … 600 Hz |
Free field frequency response ±3 dB |
18 … 300 Hz |
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) |
<20 dB(A) SPL |
Sine wave output with a THD < 0.5 % at 1 m in half space |
95 dB SPL (>40 Hz) |
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) |
116.7 dB SPL |
Reproduction accuracy between 50 Hz and 100 Hz: 100%, 80%, 50% of subwoofers produced |
±1.20; ±0.54; ±0.28 dB |
Crosstalk (1 kHz), level matching |
-95 dB; ±0.1 dB |
LFE Gain |
0 / +10 dB |
Analog output(s) |
8 x XLR; analog electronically balanced |
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) |
118 dB SPL |
Equalization: Low cut |
30 Hz; 0 … -12 dB |
Equalization: Parametric EQ: Gain |
+4 ... -12 dB |
Equalization: Parametric EQ: Frequency |
Bypass; 20 ... 120 Hz |
Equalization: Parametric EQ: Q |
1 ... 8 |
Phase |
0; 45; 90; 135 and 0/180 deg |
Display: Bass Management on |
Green LED |
Cabinet weight when electronics remote located |
45.5 kg (100 lbs 5 oz) |
Bass Extension (Hz, -6 dB) |
17 |
Maximum output level (dB SPL) |
110.7 |
Max. Listening Distance up to (m) |
11 |
Analog input(s) |
8 x XLR: analog electronically balanced |
Analog input impedance |
>13k Ohms |
Max. input level |
+19 dBu |
Common mode rejection ratio (CMRR) |
> 56 dB @ 15 kHz |
Volume control |
NRC 1 hardware remote or RS-232 |
Volume control range; resolution |
118 dB; 0.25 dB |
Analog dynamic range; THD+N |
119 dB(A); <0.001% (-100 dB) |
Signal routing modes |
LFE 80+re-routing; LFE 80 Hz; LFE 120 Hz; Wide |
Input gain control (sensitivity) |
+2 ... -12 dB |
Output level control (output level in 1 m based on 0 dBu input level) |
100; 114 dB SPL |
Controller design |
Analog, active |
Crossover frequency |
80 Hz |
Crossover slope |
24 dB/oct; 4th order |
Protection circuitry |
Peak and thermo limiters |
Infrasonic filter: frequency; slope |
6.5 Hz; 12 dB/oct. |
Remote control |
RJ45 connector: Via NRC1 remote control (optional): volume for all channels; bass management on/off; LFE gain 0/10 dB.Via RS-232: more parameters remote controllable |
Display: On; Normal Operation |
Red LED |
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute |
Red LED |
Output power woofer amplifier (THD+N with limiter deactivated: 10%) |
400 W |
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) |
320 W |
Mains Power Supply: input voltage; frequency |
220-240 / 100-120 V (switchable); 50/60 Hz |
Power consumption (230 V / 100 V): Idle |
25 W |
Power consumption (230 V / 100 V): Full output |
550 W |
Cabinet material |
Wood cabinet, aluminum electronics panel |
Cabinet surface finish; color (front / back) |
Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
Operating conditions |
+10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
Transport/storage conditions |
-25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
Woofer |
2 x 265 mm (10") with magnetic shielding and protecting black metal grille |
Mounting points |
35 mm flange on top panel |
Product dimensions (height x width x depth) |
735 x 330 x 645 mm (28.9" x 13" x 25.4") |
External net volume |
156 liters |
Packed dimensions (height x width x depth), mm (inches) |
860 x 470 x 770 mm (33 7/8" x 18 1/2" x 30 3/8") |