Product | TLM170 | Detail Data

Acoustical operating principle Pressure gradient transducer
Directional Pattern Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
Frequency Range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 8 mV/Pa ± 1 dB
Rated Impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR¹⁾ 26 dB
Equivalent noise level, A-weighted¹⁾ 14 dB-A
Maximum SPL for THD 0.5%²⁾ 144 dB
Maximum SPL for THD 0.5% with preattenuation²⁾ 154 dB
Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾ 68 dB
Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾ 80 dB
Maximum output voltage 10 dBu
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3 mA
Matching connector XLR 3 F
Weight 625 g
Diameter 60 mm
Length 152 mm

1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

3) measured as equivalent el. input signal

Diagrams

Figure 8 TLM 170 R

Figure 8 TLM 170 R Figure 8 TLM 170 R

Wide Cardioid TLM 170 R

Wide Cardioid TLM 170 R Wide Cardioid TLM 170 R

Omni TLM 170 R

Omni TLM 170 R Omni TLM 170 R

Cardioid TLM 170 R

Cardioid TLM 170 R Cardioid TLM 170 R

Hypercardioid TLM 170 R

Hypercardioid TLM 170 R Hypercardioid TLM 170 R